Search by Criteria: <=  Bore diameter (d)mm  <=
<=  Outside diameter (D)mm  <=

Deep groove ball bearing » Deep groove ball bearing with open and sealed type

Deep groove ball bearing with open and sealed type

Principal dimensions(mm) Basic load ratings(kN) Bearing No. Abutment and fillet dimensions Speed ratings (rpm) Weight(kg)
d D B rsmin dyc(Cr) stc(Cor) Bearing No.1 Dsmin Dsmax dhmax Rmax Grease Oil Weight(kg)
10  30  0.6  6.5  6200-Z  13.5  14.5  26  0.6  24000  30000  0.0271 
10  30  0.6  6.5  6200-2Z  13.5  14.5  26  0.6  24000  30000  0.027 
12  32  10  0.6  6.5  6201-Z  16  16.5  28  0.6  22000  28000  0.0369 
12  32  10  0.6  6.5  6201-2Z  16  16.5  28  0.6  22000  28000  0.0373 
12  32  10  0.6  6.5  6201  16    28  0.6  22000  28000  0.0365 
15  35  11  0.6  6202  19    31  0.6  19000  24000  0.0431 
15  35  11  0.6  6202-Z  19    31  0.6  19000  24000  0.0432 
15  35  11  0.6  6202-2Z  19    31  0.6  19000  24000  0.045 
17  40  12  0.6  9.1  6203-2Z  21    36  0.6  17000  20000  0.0642 
17  40  12  0.6  9.1  6203-Z  21    36  0.6  17000  20000  0.0665 
17  40  12  0.6  9.1  6203  21    36  0.6  17000  20000  0.0661 
20  47  14  13  6.7  6204  25    42  15000  18000  0.11 
20  47  14  13  6.7  6204TN1  25    42  15000  18000  0.104 
20  62  16  18.2  10  6304X3/C3  28    54  13000  16000  0.252 
20  47  14  13  6.7  6204-2Z  25    42  15000  18000  0.111 
20  47  14  13  6.7  6204-Z  25    42  15000  18000  0.109 
20  47  14  13  6.7  6204-2RS  25.6    41.4  10000    0.121 
22  56  16  1.1  14.2  9.25  63/22/C3  29    47  12000  15000  0.183 
23  56  15  18.5  9.3  66/23/P53YB2  29    47  12000  15000  0.131 
23  56  15  18.5  9.3  66/23/P53Z2  29    47  12000  15000  0.125 
Total¬†751 records   Next Page

Product Description

Feature
They are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial

 

load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required.

 


Cages
Deep groove ball bearings generally use pressed cages of steel sheet or brass cages. When the outer diameter is less than (inclusive)400mm, they use

 

pressed cage with steel sheet. When the outer diameter is bigger than 400mm,they use brass cages.

 


Applications
Can be found in automobiles, machine tools, motors, instruments, construct machines, railway vehicles, agricultural machines and various other special

 

machines

 


Types
Basic type, With snap ring groove on the outer ring(-N),With one shield(-Z) on one side or two shields(-2Z) on both sides, With one seal(-RS)on one side or two

 

seals(-2RS)on both sides.